How To Take A Car Door Apart. Remove door panel screws you will need a t20 torx bit to remove 3 screws at the bottom of the door panel, hidden under the edge as pictured. Behind it, you should find mounting screws, which you can then loosen to remove the handle.
Taking the door apart and prepairing it for paint '87 S4 Auto from rennlist.com
Use the tip of your key to push open the door’s keyhole slot. Remove the carburetor and air cleaner. Repeat this process with each bolt that you had to remove during the door replacement.
Im Guessing The Pins Are Metal Clips.?
Behind it, you should find mounting screws, which you can then loosen to remove the handle. Or the back of a screwdriver.or a fist. Force out a pin with a slim implement such as a knitting needle.
Tease One End Of The Cord Down Toward Where The Door Handle And Tease The Other End Of The Cord Toward The Side Mirror, And Then Work Them Back And Forth To Pull The Knot Lower.
Thrust the screwdriver in between the door and the panel. For most doors, you should see 1 to 3 exposed mounting screws on the side of the door that doesn’t have a keyhole. Pop those clips out of the door and place them back in the panel.
Car Door Panel Removal Tools.
Drain and remove the radiator and fan. There is also one other sneaky screw on the inside edge of the door, near the top. Take the door panel out by pulling upward.
Im Pretty Sure It Should Be Like That.
With the panel still pressed back, remove the pin or slide back the clip. Itll all werk the same. Lubricate the securing bolts or screws with penetrating oil.
Disconnect The Transmission And Exhaust System From Underneath The Car.
The simple way to remove a door photo 1: Method 1 removing a handle with exposed screws 1 check for exposed screws on the inside of the door. Oh yeah.when putting it back on, match up the pins + holes.and whack the place where there should be a pin with a small mallet.
0 komentar:
Posting Komentar